Bulk earthworks, precision excavation, trenching and forestry mulching across South East Queensland. One crew, one fleet, and a team of highly skilled final trim operators accountable for the finish.
Four core service lines, all run by the same outfit. No subcontractor gaps, no waiting on someone else's machine — and a finish you can hand straight to the next stage of the build.
01Cut and fill, site levelling, building pads and access tracks built to design levels. We balance your site so spoil cartage is minimised and the finished surface is ready for the next trade.
02Service trenches, footings, piers and auger holes dug clean and to spec. Tiltrotator and 2D GPS on the 8.5 tonne means tight tolerances, even in the corners other diggers cannot reach.
03Scrub, regrowth and unwanted timber mulched on the spot — no burn piles, no skip bins, no mess left behind. Ideal for fence lines, building envelopes and fire breaks.
04Our own tippers, tipper-and-trailer combinations and three 27.5 tonne articulated dump trucks move material and plant, backed by a 21 tonne tag trailer and 5 tonne forklift. Crushed rock, gravel, sand and spoil handled in-house, on your schedule.
Everything below is owned, maintained and operated by Uncover Group — including 19 attachments that turn one machine into five. Tap a unit to read its setup.
The workhorse of the fleet. Tiltrotator plus 2D GPS guidance means batters, service trenches and tight-access digs are cut right the first time.
The production machine. Bulk cut, trench runs and deep excavation at volume, with the reach and stability to hold batter grades all day.
Standard machine setup — ask us about attachments
Compact, nimble and gentle on finished surfaces. Built for backyard access, footing excavation, plumbing trenches and detailed trim work.
Bulk push, stripping and spreading. The D6 shapes batters and levels large areas fast, so the final trim team starts on a surface that is already close.
Standard machine setup — ask us about attachments
Fine grading to design levels — pads, driveways, car parks and road formations. This is the machine that turns a rough site into a surface you can set out from.
Standard machine setup — ask us about attachments
Purpose-built forestry carrier. Clears scrub and regrowth, mulches on the spot and prepares fence lines and building pads without burn piles.
Cartage sorted in-house. Crushed rock, gravel, sand and spoil moved on our own truck, so there is no waiting on a third-party haul.
Standard machine setup — ask us about attachments
Two Mack Trident tipper and trailer combinations for high-volume cartage — bulk spoil out, crushed rock, gravel, sand and fill in, loaded on site and tipped where it is needed.
Standard machine setup — ask us about attachments
Three ADTs on call for site haulage — shifting bulk spoil, fill and rock across wet or rough ground where a rigid truck would bog down.
Standard machine setup — ask us about attachments
Our own float for moving plant between sites and delivering materials, including oversize attachments and buckets.
Standard machine setup — ask us about attachments
Keeps deliveries moving on unprepared ground — pallets of pavers, pipes, timber and blocks unloaded exactly where the crew needs them.
Standard machine setup — ask us about attachments
All plant insured and maintained to spec
Check availability
Servicing
Brisbane · Ipswich · Logan · Gold Coast · Sunshine Coast · Scenic Rim
Uncover Pty Ltd Earthmoving is a South East Queensland earthmoving contractor built around precision rather than volume. We run a late-model fleet of our own — Hitachi excavators with tiltrotator and 2D GPS, a Cat D6 dozer and John Deere 770P grader, three Bell 330E articulated dump trucks, two Mack Trident tippers with trailers, a forestry-spec ASV PosiTrack, plus a tipper, tag trailer and forklift — so the right machine is always on site with the right attachment behind it.
That means fewer trades to coordinate, no waiting on a hire company, and a team of highly skilled final trim operators who have already read your plans before the first bucket hits the ground. Whether it is a house pad, a subdivision stage or a service trench under an existing driveway, the standard does not change.
The machine that fits the job — not the biggest thing we own. Less damage to your site, less cost on your invoice.
Our team of highly skilled final trim operators sees the job from first cut through to final trim. You deal with the people doing the work.
Tippers, three dump trucks, float and forklift under the one banner. Material arrives and spoil leaves without a chain of phone calls.
Address, scope and any plans or drawings. Photos of the site help more than you would think.
We inspect access, services and levels, then price the job properly — no surprises once we start.
Plant floats in, the site is set up and cut. Daily contact with our team of highly skilled final trim operators on progress.
Levels checked, spoil cleared and the site left tidy. Ready for the next stage of your build.
Tell us what needs moving. Send through the address, a rough scope and any plans you have — we will come back with a written quote and a start date.
